How To Fix “Getting Windows Ready” Error On Windows

With each new operating system release, the Windows installation procedure grows easier. Most of us recall the arduous XP installation process, with all the hullabaloo about drivers and early setup. That isn’t the case with Windows 10, thankfully.

However, there’s a valid reason why people dislike too simple installation procedures. To begin, the majority of your drivers are installed automatically during setup. Second, there’s a chance that anything will go wrong during the installation. And if that happens, you might as well go back to Windows 7 or even Windows XP.

One of the issues that many customers have encountered is that the screen becomes stuck on the following message: Getting Windows Ready. Do not turn your PC off.

What exactly does “getting Windows ready” imply, and how long can I expect to wait?

Getting Windows ready is the first step. The notice “Don’t switch off your computer” appears to let you know that some optimization and configuration operations are in progress, and you shouldn’t interrupt them by turning off your computer.

It’s worth noting that the projected wait time is roughly 5 minutes. Some consumers, however, had to wait for a long time, and it appears that this problem is more common among HP, DELL, and Lenovo PC and laptop users.

Whether there is no animation on the Gettin Windows ready screen, you can typically tell if the process is stalled.

There are a variety of issues that might arise with Windows updates, and we’ll focus on the following topics in this article:

  • Infinite loop/ update loop/ boot loop/ restart loop for getting Windows ready – Many customers have claimed that they are unable to access Windows due to a restart cycle.
  • After a restart, get Windows ready – This problem is most likely caused by an unfinished update, which Windows will attempt to complete every time you restart your computer.
  • Windows is getting ready to work on updates – This message is a variant of the one that shows after a significant Windows update. Try some of the methods from this post to solve this issue.
  • After the upgrade, getting Windows ready is not working – This warning can occur after installing an update in some situations; the installation process may not be completed, causing this message to display.

However, because you are unable to access your system and undertake to troubleshoot, it is difficult to resolve this problem. Below are various workarounds that you can attempt.

What can I do if Windows 10 keeps saying it’s getting ready?

1. Shut down your computer completely

After some time has passed, you should shut down your computer completely. Keep in mind that this isn’t as risky as some may believe. Although the operation may be completed after some time, the screen will stay inactive.

Looking at the HDD activity light is the easiest approach to figure out when it’s time for a hard restart/shutdown. If the bulb isn’t flashing, the operation is complete, and you should turn off your computer.

You should be set to go if the system starts up as expected. If this isn’t the case, your only option is to start over with the reinstallation process.

However, we recommend that you complete a clean installation this time. After this type of failure, there’s a good chance your system won’t work as it should.

Read more:

How To Fix “Getting Wwindows Ready” Error On Windows

Fix – “Gaming Features Aren’t Available For The Windows Desktop”

2. Carry out a startup troubleshooting procedure

Step 1: At the same time, hold down the Shift key and push the Power button.

Getting Windows Ready

Step 2: While the machine is turning on, keep holding the Shift key.

Step 3: You’ll see a menu with a few options when the computer restarts. Select Troubleshoot from the drop-down menu.

Getting Windows Ready

Step 4: Click on Advanced options.

Getting Windows Ready

Step 5: Select Startup Repair from the Advanced options menu.

Getting Windows Ready

Step 6: Select an account on the Startup Repair page. To continue, you’ll need an account with Administrator rights.

Step 7: Click Continue once you’ve entered your password.

Step 8: Wait for the procedure to complete before restarting your computer.

3. Carry out a fresh reinstallation

You should be able to get started with a clean reinstallation. If you don’t back up crucial data from the system partition and don’t have your license key handy, you’ll be in big trouble.

Furthermore, the reinstallation procedure is not as time-consuming, and you should be able to complete it in less than an hour, including driver updates and system customization.

To execute a clean installation of Windows 10, you’ll need to use the Discs Creation Tool to build Windows 10 installation media. Because you can’t access your computer, you’ll need to build installation discs on a different computer. After that, you must take the following steps:

Step 1: Connect your PC to the Windows 10 installation disk and boot from it. Keep in mind that in order to boot from Windows 10 installation disk, you may need to hit the proper key or alter your boot priority in BIOS.

Step 2: Select the language you want to use and then click Next.

Step 3: Click Install Now and follow the on-screen instructions. Remember that a clean install will delete all contents from the specified disk, so make a backup of any vital information before proceeding.

In order to execute a clean install, you must also pick the right drive. If you choose the wrong disk by mistake, you’ll lose all of the files on that drive, so be cautious.


The issue should be totally fixed after the setup procedure is done. For more details, see our article on how to execute a clean reinstallation for a thorough explanation. See more useful articles on my website Densbits

Similar Articles


Leave a reply

Please enter your comment!
Please enter your name here



Most Popular